How in LIST DATA input to the GRID form in,also may output in the writing file?

[JTHWAMAN]

How in LIST DATA input to the GRID form in,also may output in the writing file?


under has a section in series,

(setq lst (list (list "A" 0 22)
      (list "B" 1 23)
      (list "C" 2 24)
      (list "D" 3 25)      
      (list "E" 4 26)
      ))

how are list data in the grid form ?
Moreover, may output into the writing file,
how should process?

[BazzaCAD]

as long as you have the 3 columns setup at design-time, this will work:

Code Select Expand

(setq lst (list
      (list "A" "0" "22")
      (list "B" "1" "23")
      (list "C" "2" "24")
      (list "D" "3" "25")     
      (list "E" "4" "26")
      ))
(dcl_Grid_FillList Proj1_Form1_Grid1 lst)
(Note, this need to be strings, not Int's)

Have a look at the intelligent Help system for more info on these functions.

You can also use:

Code Select Expand

(Setq rValue (dcl_Grid_AddString Proj1_Form1_Grid1
sString [as String]
{Optional}  sDelimiters [as String]))

OR

Code Select Expand

(dcl_Grid_AddRow Proj1_Form1_Grid1
   (list 
{Optional}  nImageIndex ... [as Integer]
sText [as String]
{Optional}  sColText1 sColText2 sColText3 ... [as String])))

For writing to a file, use the LSP functions OPEN & WRITE-LINE, there's no OpenDCL functions needed to write to a file.

Code Select Expand

(setq output (open "C:\\temp.txt" "W"))
(write-line "HELLO WORLD" output)
(close output)
 

I hope this helps. :)