Author Topic: GstarCAD 2021 Support  (Read 4001 times)

mjacak

  • Member
  • *
  • Posts: 25
GstarCAD 2021 Support
« on: January 04, 2021, 12:54:21 AM »
Hi Owen,

Is there chance to support for Gstarcad 2021?

Regards
Mateusz

owenwengerd

  • Administrator
  • Hero Member
  • *****
  • Posts: 3094
    • Outside The Box
Re: GstarCAD 2021 Support
« Reply #1 on: January 04, 2021, 07:50:46 PM »
Yes, but I need them to send me the SDK files.

mjacak

  • Member
  • *
  • Posts: 25
Re: GstarCAD 2021 Support
« Reply #2 on: January 06, 2021, 02:23:01 AM »
Ok, then we are waiting...

Mateusz

mjacak

  • Member
  • *
  • Posts: 25
Re: GstarCAD 2021 Support
« Reply #3 on: February 09, 2021, 01:21:45 AM »
Hi Owen,

I have asked our local GstarCAD reseller to remain GstarCAD support to provide SDK for 2021. Any news about that from GstarCAD?

I found also that SDK can be downloaded from https://ovsdownload.gstarcad.net/software/GstarCAD/2021/EN/GstarCAD2021_GRXSDK.zip

(https://www.gstarcad.net/download/)

Regards
Mateusz
« Last Edit: February 09, 2021, 01:28:35 AM by mjacak »

owenwengerd

  • Administrator
  • Hero Member
  • *****
  • Posts: 3094
    • Outside The Box
Re: GstarCAD 2021 Support
« Reply #4 on: February 10, 2021, 09:39:59 AM »
Thanks, I've downloaded the SDK. I will work on GRX 2021 support as soon as time permits.

mjacak

  • Member
  • *
  • Posts: 25
Re: GstarCAD 2021 Support
« Reply #5 on: February 17, 2021, 12:09:58 AM »
Hi Owen,
Thank you for new opendcl, but i found a problem with new version. There are no definitions for functions: "dcl_...". For example there is a function: (dcl-GetVersion), but not (dcl_GetVersion).
In current Autocad, Bricscad and GstarCAD 2020 those functions works, is it possibe to keep it for GS 2021 as well ?

Regards
Mateusz

owenwengerd

  • Administrator
  • Hero Member
  • *****
  • Posts: 3094
    • Outside The Box
Re: GstarCAD 2021 Support
« Reply #6 on: February 18, 2021, 01:17:58 PM »
There were changes in their SDK related to function registration, so apparently something has broken. I don't have GstarCAD 2021 to test, but I will have a closer look at the OpenDCL code to see if I can figure out why it fails.

mjacak

  • Member
  • *
  • Posts: 25
Re: GstarCAD 2021 Support
« Reply #7 on: February 24, 2021, 11:33:02 PM »
Hi Owen,
Any news? I can test solution after update.

Mateusz

owenwengerd

  • Administrator
  • Hero Member
  • *****
  • Posts: 3094
    • Outside The Box
Re: GstarCAD 2021 Support
« Reply #8 on: March 05, 2021, 07:22:24 PM »
I found and fixed the problem with missing old-style function names in 9.1.2.1.

mjacak

  • Member
  • *
  • Posts: 25
Re: GstarCAD 2021 Support
« Reply #9 on: March 08, 2021, 10:54:07 PM »
Hi Owen,

Thank you very much. I'm going to test it and I let you know. :-)

Mateusz

mjacak

  • Member
  • *
  • Posts: 25
Re: GstarCAD 2021 Support
« Reply #10 on: March 09, 2021, 04:15:42 AM »
Works !!!!

Thanks again.

Mateusz