Difference of Exhibition

velasquez · September 20, 2009, 07:36:24 AM

Hi Owen,
In this Project I work with dcl_Control_SetPos and
dcl_Control_SetPicture to control the exhibition of images.
See the difference among this work in OpenDCL 4.1.2.2 and OpenDCL 5.1.2.3 / 6.0.0.4
That is expected?

owenwengerd · September 20, 2009, 08:33:39 AM

Try removing your calls to (dcl_PictureBox_Clear) to see if that resolves the problem.

velasquez · September 21, 2009, 05:25:17 AM

Hello Owen,

Following your suggestion I removed dcl_PictureBox_Clear of my code.
There was not any visible improvement in the change of the images.
Can the problem be in the speed of OpenDCL 6.0.0.5 or in ZOrder?

owenwengerd · September 21, 2009, 08:34:41 AM

If you use ZOrder, that could be the reason. Please send me an updated .lsp file without the calls to PictureBox_Clear, so I can have another look.

velasquez · September 21, 2009, 11:52:12 AM

OK Owen

I don't use ZOrder.
I sent for you one updated .lsp without the calls of PictureBox_Clear.
Please see the functions JoyMenuValvulas and JoyMenuAducaoAgua.

velasquez · September 21, 2009, 12:37:37 PM

Hello Owen
I believe that the problem can be with the dcl_Control_SetPos speed for PictureBox.

owenwengerd · September 21, 2009, 01:32:47 PM

I didn't receive any new file from you. I looked at your code, and I think the main problem is that your calls to Control_SetVisible cause the controls to be hidden, then redisplayed. This would force the background to repaint, thus causing the flashing.

velasquez · September 22, 2009, 10:18:21 AM

I created a new project with OpenDCL 6.0.0.5.
I am just exhibiting the form that contains the images.
I verified that the exhibition speed is really larger in OpnDCL 4.1.2.2

velasquez · September 22, 2009, 10:21:06 AM

I am posting the files now.
Excuse me.

owenwengerd · September 22, 2009, 06:19:36 PM

On my computer the form opens virtually instantaneously in Alpha 5 on AutoCAD 2010. I ran it under a profiler, and I don't see anything in the output that indicates a problem. I added a slight optimization so that it doesn't waste any time trying to paint the picture before the dialog is visible, but I don't think that is significant enough to notice. I don't know why it is slow on yours. Perhaps someone else can test your sample to see if they notice any problem.

velasquez · September 23, 2009, 04:27:26 AM

I don't also understand the problem.
The one that I can affirm that in OpenDCL 4.1.2.2 the form opened with a very larger speed in AutoCAD 2006 2007 and 2009 for this it is enough to see the image that shows this comparison.
I hope other users see the files that I posted.
Thanks.

velasquez · September 23, 2009, 04:42:10 AM

It follows the transcription of my customer's report below on OpenDCL with AutoCAD 2010. (5.1.2.3)

Thank you Sebastião…

All works now.. I changed T for the 1 et NIL for the 0 only in the command “DCL_CONTROL_SETVALUE”

But with Autocad10 the speed is horrible... .Este another problem...

Att.
Christophe

For display to the picture with the 12 pictures,: 5 seconds.
Before, it was smaller of 1 second

I have a RAM of 1,25 GB

Att.
Christophe

owenwengerd · September 23, 2009, 07:43:22 AM

What is the speed of opening the sample file in 6.0.0.5 on your system with AutoCAD 2009? Is there a noticeable difference if all picture boxes are removed from the form? Is the customer's report based on the sample, or on the real application?

velasquez · September 23, 2009, 09:29:30 AM

The speed of opening of the sample file in my system is very slow in AutoCAD 2006-2007-2009-2010.
Yes there is a notable difference when PictureBox are removed from the form.
The customer's report this based on the real application.

BazzaCAD · September 23, 2009, 10:42:09 AM

I tested your sample files on Win XP Pro SP3 w/ 4gb. ram.
On Acad 2008 & 2010
ODCL Builds: 6.0.0.5 & 5.1.2.3
In all cases the form loaded very fast, less then 1 sec.
I could see each pic. box loading one at a time, but it wasn't a noticeable delay.